Guide · Galaxy Buds with Android
Galaxy Buds EQ: Presets, Custom EQ and Measured Settings
To change the Galaxy Buds EQ, open the Galaxy Wearable app with your earbuds connected. On older models such as the Galaxy Buds2 Pro, tap Earbuds settings, then Equalizer, and choose Normal, Bass boost, Soft, Dynamic, Clear or Treble boost. On the Galaxy Buds3 and Buds3 Pro, tap Sound quality and effects, then Equalizer, choose a preset such as Balanced, Clear, Bass boost or Dynamic, or tap Custom to adjust it yourself. On Samsung phones running One UI 8, Samsung has moved the earbud controls into Settings → Connections → Bluetooth → the gear icon next to your Buds. The earbud EQ is a setting of the Buds, separate from any equalizer on the phone. For a measured correction, more bands or one profile across all your apps, add a phone-side equalizer, but keep one of the two flat so the curves don't stack.
By HapibitsUpdated 10 min read
On this page
The short answer
Galaxy Buds have a built-in equalizer that you control from Samsung's Galaxy Wearable app. Samsung's support guide for Galaxy earbuds gives the classic path as Galaxy Wearable → Earbuds settings → Equalizer, and notes that on some models the equalizer appears directly on the app's Home screen. Samsung's guide for the Galaxy Buds3 and Buds3 Pro puts it under Sound quality and effects instead, alongside a Custom option.
If your phone runs One UI 8, Samsung says the controls you used to find in Galaxy Wearable are now in the phone's Bluetooth settings: Settings → Connections → Bluetooth, then the Settings icon next to your Galaxy Buds. Samsung's One UI 8 page does not spell out the equalizer path, so look for Sound quality and effects or Equalizer once you are in that screen.
Where the Galaxy Buds equalizer is
Menu paths from Samsung's support pages. Labels can shift with app and firmware updates.
| Earbuds and phone | Where to tap | What you get |
|---|---|---|
| Galaxy Buds3 or Buds3 Pro (Galaxy Wearable) | Galaxy Wearable → Sound quality and effects → Equalizer | Presets such as Balanced, Clear, Bass boost and Dynamic, plus Custom |
| Galaxy Buds2 Pro and older models (Galaxy Wearable) | Galaxy Wearable → Earbuds settings → Equalizer (on some models, the app's Home screen) | Normal, Bass boost, Soft, Dynamic, Clear, Treble boost; the Buds2 Pro also shows a sound graph |
| Samsung phone on One UI 8 | Settings → Connections → Bluetooth → Settings icon next to the Buds | The controls previously found in Galaxy Wearable |
| Non-Samsung Android phone | Galaxy Wearable from Google Play | The earbud settings your model and the app support on that phone; some features are Samsung-only (see below) |
| iPhone | Samsung Galaxy Buds app, older models only | Samsung lists the Galaxy Buds, Buds2, Buds2 Pro and Buds Pro as not compatible with the iOS Buds app |
Galaxy Buds presets and when to use them
Samsung names the presets but doesn't publish their curves, so the descriptions below are listening guidance, not measurements. Newer models use Balanced where older ones say Normal.
| Preset | What it emphasizes | Try it when |
|---|---|---|
| Normal / Balanced | Samsung's default tuning | You want a starting point, or you plan to add a phone-side correction |
| Bass boost | More low end | Listening on a bus or train, or with music that feels thin; watch for boominess on bass-heavy tracks |
| Soft | A gentler, less bright sound | Long sessions, or recordings that sound harsh |
| Dynamic | A livelier, more contoured sound | Pop, electronic and film audio at moderate volume |
| Clear | Vocals and detail | Podcasts, audiobooks, calls and vocal-led music |
| Treble boost | More high-frequency sparkle | Dull-sounding recordings; back off if sibilance ("s" sounds) becomes sharp |
| Custom (Buds3 and Buds3 Pro) | Your own adjustment | None of the presets fits; make small changes and compare at the same volume |
Some Galaxy Buds features need a Samsung phone
Samsung ties several features to Galaxy phones and tablets: Adaptive EQ on the Buds3 and Buds3 Pro needs a Galaxy smartphone running One UI 6.0 or later; 360 Audio needs One UI 3.1 or later; Gaming mode works only with Samsung phones; Ultra High Quality 24-bit audio on the Buds3 series needs a listed Galaxy device with One UI 6.1.1 or later. Samsung doesn't say whether the Custom equalizer works on other Android phones, so check it in Galaxy Wearable on your own phone.
Earbud EQ vs phone EQ: don't stack them
The Galaxy Wearable equalizer is an earbud setting: you choose it in Samsung's app, and it applies to whatever you play through the Buds. A phone-side equalizer, such as Samsung's own Sound quality and effects equalizer on a Galaxy phone (Settings → Sounds and vibration → Sound quality and effects) or a system-wide app like Echo, shapes the audio before it is sent over Bluetooth.
You can use both, but they add together. Bass boost on the Buds plus a bass lift on the phone can push the low end far beyond what either intends, and the extra level eats headroom, which is where distortion starts. Pick one place to do the shaping: keep the earbud EQ on Normal or Balanced when you apply a measured correction on the phone, or leave the phone flat if you prefer to use the Buds presets. Samsung also notes that when Galaxy Buds are connected, 360 Audio appears in the phone's Sound quality and effects menu in place of Dolby Atmos.
- Measured correction on the phone: set the Buds EQ to Normal or Balanced.
- Buds preset only: turn off phone-side EQ and music-app EQ.
- Switch only one thing at a time and compare at the same volume, because louder usually sounds "better" for a few seconds.
AutoEq profiles for Galaxy Buds
AutoEq turns published headphone measurements into correction curves toward a target. Choose your exact model and, where there are separate measurements, the mode you use most. Open a profile in the free Headphone EQ Finder to preview the curve and copy 10-band values and a preamp, or apply the same autoeq.app data directly with Echo Pro's Auto EQ. Keep the Buds equalizer on Normal or Balanced while you do: the measurements were made with the earbuds' default sound.
The finder's dataset was imported on October 10, 2026. It has no measurements yet for the Galaxy Buds3 FE or Buds4 series. Don't borrow a curve from a model with a similar name; the Buds3 and Buds3 Pro, for example, are measured separately.
- Galaxy Buds3 Pro (DHRME) and Galaxy Buds3 Pro (Rtings)
- Galaxy Buds3 (Rtings, in-ear rig), or the earbud-rig measurements with ANC off and ANC on (Regan Cipher)
- Galaxy Buds2 Pro (oratory1990), plus ANC mode and Ambient mode (crinacle)
- Galaxy Buds FE (Regan Cipher) and Galaxy Buds FE, ANC on (Regan Cipher)
- Galaxy Buds2 (oratory1990) and Galaxy Buds Pro (oratory1990)
- Galaxy Buds Live (HypetheSonics), Galaxy Buds+ (crinacle) and original Galaxy Buds (oratory1990)
Set up Galaxy Buds EQ step by step
This combines the Samsung app with an optional phone-side equalizer; the Echo labels are examples.
Update Galaxy Wearable and the earbuds
Install or update Galaxy Wearable from Google Play or the Galaxy Store, connect the Buds, and install any earbud software update the app offers. On One UI 8, open the Buds settings from Settings → Connections → Bluetooth instead.
Open the equalizer
Buds3 or Buds3 Pro: Sound quality and effects → Equalizer. Older models: Earbuds settings → Equalizer, or the equalizer card on the app's Home screen.
Choose how you want to tune
For presets only, pick one and listen to a familiar track. For a measured correction, set the Buds to Normal or Balanced and continue on the phone.
Check the fit
Galaxy Buds with silicone tips lose bass when the seal is poor. Try another tip size before adding bass; see why ear-tip seal changes bass.
Load the measured profile on the phone
Turn off other equalizers and the music app's EQ. In Echo Pro, use Auto EQ and pick your exact model; otherwise copy the 10-band values and preamp from the Headphone EQ Finder.
Fine-tune and save a device profile
Make one small change at a time, such as +2 dB of bass, and keep the negative preamp. Save it as a profile tied to the Buds so it applies automatically when they connect.
Galaxy Buds with a non-Samsung Android phone
Galaxy Wearable is listed on Google Play without a Samsung-only restriction, so you can install it on a Pixel, OnePlus, Xiaomi or other Android phone, pair your Buds and use the app's settings there. Samsung's footnotes give different minimum Android versions for different Buds, so check the support page for your model if the app won't connect on an older phone.
What you lose are the features Samsung reserves for Galaxy devices, listed in the callout above, plus Auto Switch between Galaxy devices, which needs One UI 4.1.1 or later and a Samsung Account. Samsung doesn't document whether the Buds3 Custom equalizer is available on other phones, so treat that as something to check on your own device. A phone-side equalizer works the same on any Android phone, because it processes audio before Bluetooth.
Codec note: Samsung Seamless Codec and UHQ audio
On a Galaxy phone, Samsung's own codec can carry higher-resolution audio to supported Buds: Samsung announced 24-bit audio for the Galaxy Buds2 Pro via the Samsung Seamless Codec on Galaxy devices with One UI 4.0 or later, and lists Ultra High Quality 24-bit/96 kHz audio for the Buds3 series on listed Galaxy devices with One UI 6.1.1 or later. On other Android phones, the Buds use a standard Bluetooth codec instead. Either way, a phone-side equalizer is applied before encoding, so it works with whichever codec is active. See Bluetooth codecs explained for what codec labels can and can't tell you.